I've taken the plunge and bought an SSD and want to move my existing Windows installation over. The current hard disk is 500Gb, but I've trimmed the contents down to about ~40Gb. I'm transferring it across to a 100Gb SSD and looking for the easiest way just to copy everything across and set the SSD up as a boot device.
I've looked at a few tools like Macrium Reflect, but they don't seem able to restore to a smaller drive. Do I need to go for something like PING to do this? I'm trying to avoid scary Linux-based boot utilities if possible, does anyone know of an easier way?
Connect a new storage device to your computer, then download and install Hard Disk. “Paragon Software's Migrate OS to SSD is easily the most efficient. Software Description: Paragon Migrate OS To SSD 4.0 – Latest Version Crack Serial. With the Paragon Migrate OS to SSD software,you can transfer your Windows to the new SSD drives. The purpose ofthis software is to prevent rebooting the operating system whenbuying a new hard drive.
studiohack♦
15 Answers
ImageX is a free tool that is part of the Windows 7 WAIK (download). It is what we use for imaging machines at work. It can even be used to create backups of the machine. If you're doing the C drive (you have another drive D, and your SSD is currently set to E), then it would just be a matter of booting into Windows PE, and then
That will make a very large file named image.wim on the other drive. You could even map a drive, and put it on the network, which is what we do.
Then, reconfigure the drives to make sure that the SSD is now C:.
Reboot into Windows PE again, and type:
Then, after that, it is CRITICAL to run this command, still in PE:
that will have it make everything bootable.
Livingstone (LVI) - Named after the famous Victorian missionary explorer, Dr. Screenshot of Livingstone International Airport. Lock on modern air combat. By Bashir Ismail.
If bcdboot.exe fails you might have to mark the partition you copied Windows on as active first using the diskpart utility.
How To Use Paragon Migrate Os To Ssd
Windows 7's built-in backup feature makes this very easy, as long as you have another (third) drive to store the backup on.
I just did this this weekend, and it worked perfectly.
My successful experience:
All Train Horn Sounds in both Wav and MP3 formats Here are the sounds that have been tagged with Train Horn free from SoundBible.com. Search free train horn ringtones and notifications on Zedge and personalize your phone to suit you. Start your search now and free your phone. Train horns, bells, crossing signals, and Conductor sounds in a free soundboard. The newest Train Horns app with the best layout. All train horns and sounds. Train ringtones free download.
- Attach the SSD drive and format as NTFS
- Boot with the Windows 7 original DVD -> Restore
- Check the source drive letter and destination drive letters (e.g. E: and H:)
Execute:
Detach the old drive and boot again with the Windows 7 original DVD -> Restore
- Shutdown
- Swap the drive, power on, select to boot from the new drive in the BIOS
Though @Brian answer should work, i used this one and it is much faster and dont require WAIK or WinPE:
Create the partitions
- On the new drive create a 100MB partition on the beginning of the drive, mark it as active
- Create another primary partition at least as big as the original C:
- Mount both partitions, for instance the small one as Y: and the big one as X:
Copy the partitons
We have to copy everything, even the MBR.
- Get a partition copy utility that works in windows 7. I used Acronis Disk Director, but i believe Norton Ghost, Acronis True Image or even Seagate Discwizard should do it.
- Copy your C: partition to the new drive X:
- This should require a reboot
Change drive letter
You have to edit the new drive regedit so the assigned drive letter is not X:, but C:
- Open REGEDIT
- Select HKEY_LOCAL_MACHINE
- Go to File -> Load Hive
- Open
X:[Your windows dir]System32ConfigSYSTEM - Choose a Key name, like 'TEMP'
- It will create a Temp folder, open it and locate
MountedDevices - Scroll Down and rename
DosDevicesC:toDosDevicesZ:(or an unused letter) - Finally rename
DosDevicesX:toDosDevicesC:
Be sure to rename the entry on your new drive's registry, not on the old one
Create BCD
This should do the
bcdboot.exerole- Get EasyBCD
- Go to BCD Deployment, chose the new drive's 100MB partition Y:
- Install BCD
- Accept the dialog, to open the brand new BCD
- Go to Add new entry, select Windows, Type: Windows Vista/7, drive C: and click
Add Entry.
Change boot device
- Reboot and get in your BIOS config (F1 or DEL)
- Change HD priority, moving the new HD up
That's all
bortaobortaoI just successfully copied my Windows install over to a new SSD yesterday. I knew I wanted to use GParted, but wasn't sure what to do after that. It took me a couple hours to get the computer booting from the SSD after I copied Windows over, so I thought I'd make note of what I did.
Here is what I did:
Freed up enough space on my hard drive so that what was on it would fit on the SSD.
Downloaded and burned a GParted live CD. It is a Linux based partition editor, but I've found it easy to use and reliable.
Put the SSD into the computer.
Changed the boot priority in the BIOS to have the SSD at the top (good to verify so you know where you're booting from).
Booted to GParted and resized my hard drive's partition to be smaller than the SSD. The resizing took almost an hour. Then I copied and pasted the hard drive's partition to the SSD and resized it to fill the SSD at the same time. Took about half an hour. (Go in advanced mode and consider options, such as --recover, if dealing with a defective disk).
I unplugged the hard drive with my old Windows install. You don't have to, but if it is unplugged, then when the computer is booted and the desktop appears, you know everything is working right. (During my attempts when I didn't have the hard drive unplugged, I once booted from the SSD when it was drive E, but the registry still referenced drive C. So I was using
E:Windowsfrom the SSD, butC:UsersandC:Program Filesfrom the hard drive.)Booted to the Windows 7 install disk and opened the recovery command prompt. The drive letters needed changed so that the SSD's partition is C: like it was on the hard drive. I did this with
diskpart. Something like this (the SSD is 111 GB):Editor review - Metro Name ID is a useful app which enables you to identify the people who are calling you and gives you the power to block unwanted calls. Metro Block-it is available to download on the phone via the @metro App store. Customers will have access to a 30-day free unlimited trial of the application. Feb 14, 2012 - After the first 30 days users can continue with the service for only $1 a month, and the application can be downloaded through the Metro App. Stop unwanted calls with Metro Name ID and say goodbye to scammers, telemarketers, and other questionable callers. With Name ID, you can block these. https://tavilniha.tistory.com/3.
** IMPORTANT: If partitions were cloned to new disk, you won't be able to tell them apart while having both disks connected. Simplest thing is leaving a text file in the OS partition saying which drive that is.
Executed these commands before restarting:
I'm not sure they are all necessary but running them doesn't hurt.
Booted from the SSD and everything worked. I plugged the hard drive back in.
FILE SETS: Mozilla Firefox 34.0.5 for Windows and Google Earth 6.2.2.6613 for Windows. Compression ratio We compared 7-Zip with WinRAR 5.20. Archiver Mozilla Firefox Google Earth 65 files 85 280 391 bytes 483 files 110 700 519 bytes Compressed size Ratio Compressed size Ratio 7-Zip 9.35 -mx 39 357 375 100% 15 964 369 100% WinRAR 5.20 -m5 -s -ma5 -md128m 41 789 543 106% 17 035 432 107% Compression ratio results are very dependent upon the data used for the tests. Usually, 7-Zip compresses to 7z format 30-70% better than to zip format. 920-20u(full)zip download windows 10.
Acronis True Image Home can do exactly what you ask. It allows you to restore to any partition size granted that the new partition is at least as large as the original image. Note, that sometimes it will refuse to restore to a different partition size or new hard drive/SSD. In that case, you must make the new partition on the device at least 10GB larger than the original image size (uncompressed).
I was working on following the instructions in reply to paragraph 3 from Bortao about changing your drive letters when lo and behold Windows 7 would not allow me to open the System folder X:[Your windows dir]System32ConfigSystem (claimed it was already open) so I decided to wing it.
I exited 'open hive' and searched for DosDevices which I located at
I renamed
DosDeviceC:toDosDeviceZ:DosDeviceX:toDosDeviceC:DosDeviceZ:toDosDeviceX:
After that I did a lot of registry editing to change all references to X: to C:When regedit would not allow the change, I ignored the problem, and rebooted.
I like imagex. It is file based and one can compress, check, verify, etc. among other commands. Acronis is good also. Make sure you are using a 32 bit WinPE disc for maximum compatibility. A 64 bit WinPE will require using a 64 bit imagex which only allows for imaging 64 bit systems.
May I suggest DriveClone from the Farstone company. It is freeware. I have used this cloning software numerous times with success. The only failures were when the SSD was MUCH smaller than the source. (say, 750gig source to 90gig SSD destination) The workaround for that was to clone to a SOMEWHAT smaller mechanical drive, and then clone from that to the SSD.
the original mike westernthe original mike westernSymantec Backup Exec System Recovery or GHOST will do this as well. There is a free trial of Backup Exec System recovery Symantec BU Exec Home Page. Some SSD vendores have a tool for their drives for just this scenario. Did you check with the manufacturer?
Dave MDave MI just did this, and I'll be honest - Win7 installed so quickly on the SSD, I kind of enjoyed the fresh install. I'm not sure how happy the windows drivers will be with a straight up copy - the reinstall may involve the least amount of time investment.
No need to use expensive tools. You can create a Snapshot using a trial version of DriveSnapshot to make a snapshot of your ~40 gb of data. I often used it back in the times of Windows XP and it is still great! You can make the snapshot 'live' without any hassle (I think).
Partition your SSD as needed, then just use DriveSnapshot again to extract your snapshot to the SSD.
Diogo
I recently purchased an Intel SSD drive and could not get the included Acronis software to detect an Intel drive. So I tried Ghost from Symantec and lets just say 'Ghost isn't what it used to be'.
I then decided to give Paragons 'Migrate OS to SSD' Software a try and it did not work either. After a nightmare trying to order the software, with German Bank charging my card, etc., I got the software thanks to a very nice person at Paragon software deciding to give me a complimentary copy out of what I can only assume was pity.
I had already attempted to shrink my OS boot partition from 1TB to a more manageable size and did get it to around 186GB, which was not small enough to use Windows built in imaging software with my 160GB (149GB formatted) hard drive. So on to the Paragon solution.
I downloaded, installed and ran the software. A few prompts later it was completely done. The entire image was in reality 58GB and so took about 8 minutes, if that, to complete. After swapping the boot order in the system BIOS to reflect the new SSD, the system still booted from the original OS HDD and not the SSD. The files were on the SSD—the directory structure and content was right, but the long and the short of it is that the software did not work as advertised.
I tried checking to see that partition had not been made hidden by the software and it had not. I tried all of the above mentioned bootrec and bcdboot options and still 'no joy'. I was left with an OS that would crash on boot saying 'Autochk program not found. Skipping Autocheck.' then bluescreen for .5 seconds and reboot to the same end.
On the birght side the fresh install took about 11 minutes. The reconfigure and data transfer has taken much longer, though I now have that 'NEW INSTALL' feel and I like it! Anyway, Migrating the OS to SSD did not work for me but may work for you. I don't know.
Haven't tried it personally, but there's a free drive copy utility called EaseUS Disk Copy.
slhckParagon Migrate Os To Ssd 40 Download Free
cpugurucpuguruIs no easy way, spend like 4 hours try to copy windows 7 to another HDD nothing is free, everything from google is paid and not working
For windows 10 you can use: snapshot.exe and then use USB windows 10 installer then run repair options and its done. Just remember to mark partition as active because snapshot only copy data
Windows 7Clone HDD to another by this software super easy: HDDRawCopy1.10Portable.exe and free
protected by slhckJul 20 '12 at 14:13
Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
Not the answer you're looking for? Browse other questions tagged windowshard-drivepartitioningssd or ask your own question.